
"How detailed do you paint 15mm ACW figures?" Topic
8 Posts
All members in good standing are free to post here. Opinions expressed here are solely those of the posters, and have not been cleared with nor are they endorsed by The Miniatures Page.
Remember that you can Stifle members so that you don't have to read their posts.
For more information, see the TMP FAQ.
Back to the ACW Discussion Message Board Back to the ACW Painting Guides Message Board
Areas of InterestAmerican Civil War
Featured Hobby News Article
Featured Link
Featured Profile Article The Editor heads for Vicksburg...
Featured Book Review
|
| Russ Haynes | 21 Nov 2026 4:43 a.m. PST |
How detailed do you go on these, possibly boring figures? I've always been a "prime white, block paint and pick out details that are sculpted" for 15mm ACW figures. No dip, very little washing or dry brushing (98% none of that stuff). Then, varnish with a satin finish so I get some glow and a little of the old school gloss at the same time. Satin seems to pick up the light on 15mm figures better than flat varnish. Like I said I carefully pick out sculpted details like buttons on forage caps and uniforms, belt plates, cartridge box plates, and rifle bands, etc. Old glory figs are great for this type of painting. I've thought about "the dip" many times over the years but I don't want to muddy details. How far do you go with the details on 15mm ACW figures? |
| Russ Haynes | 21 Nov 2026 4:51 a.m. PST |
I have to admit that painting union troops isn't as much fun as painting rebs. My current 15mm CSA army was planned out in meticulous detail with regards to coat and pant color combinations for each nominal 10-stand F&F brigade. Eventually, I will have a few rebel brigades in a more uniform color for jackets but since my current project is for western/Trans-Mississippi confederate troops, I'm going with at least a dozen coat colors, from tan/sand and other browns to dark gray with a bunch in between. The same goes for rebel slouch hats. Blacks, grays, browns and tans all mixed. |
Frederick  | 21 Nov 2026 5:04 a.m. PST |
Now I spray on a white base coat and use the GW Contrast paints – for the faces/hands flesh and a sepia wash – and then things like belts/guns/etc. |
robert piepenbrink  | 21 Nov 2026 6:09 a.m. PST |
I don't. After a lot of heartburn--and many thousand figures--I concluded 15mm were an unsatisfactory compromise. These days, skirmishes and small battles with figure-removal rules are played with 28's and seriously big battles with rosters or stand-removal rules with 6mm figures. (I keep a few 10mm so I can play rules like OTR and F&F.) It was a rough conversion, but I'm a happier painter as a result. No more painting detail you won't see on the game table. |
79thPA  | 21 Nov 2026 6:31 a.m. PST |
I used to be concerned about it, but I am not anymore. You can't see the painted detail as soon as you move the figure away from your face. I appreciate a well painted figure, but I am not that kind of gamer. |
| Russ Haynes | 21 Nov 2026 7:17 a.m. PST |
Robert P. I get it. I have toyed with the idea of 6mm for large scale battles but I'm pretty deep into 15mm for just about everything. If I ever went to 6mm it would probably be a new project like WWII tank warfare. 79th, I understand completely. But, I would always know I hadn't "finished" the figures in my mind. I'm not too OCD about most things but the small details take just a little bit of extra effort and time and are more for my satisfaction anyway, since I mostly solo game. My first miniature wargames (and I didn't know it at the time) were when I was about 9-10 years old and I developed armies from different colored construction paper cut into squares that I could use for any army from Ancients to modern. I've often considered going back to some form of this system with more formal rules than those I came up with as a kid. |
Flashman14  | 21 Nov 2026 7:27 a.m. PST |
I've been painting them for decades now so I've changed my method over time. If a detail is sculpteed on I paint and and generally, I think the clean lines of layering is the best way:
Then sometimes I adopt new techniques like Contrast/Speed paints – which are nowhere near as good. (Yes, of course, one could highlight over all this but, as instructed, here is the result:
As to details, I follow the sculpt – even eyes if they are discernible:
I need to reshoot that last image at some point … I've posted up nearly everything here: link |
martin goddard  | 21 Nov 2026 9:19 a.m. PST |
I usually undercoat in dark brown. Paint in the blue, grey et al. Paint straps, bottle , bag and rifle sling. Pick out face with nose, cheeks and chin. Use pale flesh. Touch collar or cuffs with branch colour as desired. Hair usually dark brown. Bright work with metal after varnishing in matt. 15mm suit me best as I play battles and still want some animation in my units. Bases fairly uniform with some tufts and trimmed base corners. per warflag flags with plenty of scrunching All the other figure sizes are fine too. I have played ACW battles in 5mm, 15mm, 20mm and 54mm over the last 60 years. martin
|
|