
"FDM printer recommendations" Topic
8 Posts
All members in good standing are free to post here. Opinions expressed here are solely those of the posters, and have not been cleared with nor are they endorsed by The Miniatures Page.
Please avoid recent politics on the forums.
For more information, see the TMP FAQ.
Back to the 3DPrinting Message Board
Areas of InterestGeneral
Featured Hobby News Article
Featured Link
Featured Ruleset
Featured Showcase Article Hobby brushes direct from Sri Lanka.
Featured Profile Article Inexpensive clay modeling tools.
Current Poll
Featured Book Review
|
| Logan1969 | 16 Nov 2026 7:57 a.m. PST |
This will be my first 3d printer. I want a FDM printer for terrain. My research has lead me to the Bambu A1. From what I've seen, with a lot of experience/tweaking, they can actually yield a decent mini. However, my main purpose is for terrain. I'm tired of ordering terrain from Etsy or even locally and things get busted and having to wait for replacements. Thanks |
| IUsedToBeSomeone | 16 Nov 2026 8:35 a.m. PST |
I have a Bambu A1 which has been used for around 1,000 hours over the last 18 months – it works pretty faultlessly. I've printed a ton of scenery and some 54mm figures on it. I have had one clog (which was my fault) and had to fit a new hot end and nozzle and had an SD card fail but apart from that is has just worked. I'd recommend one. |
| Zinkala | 16 Nov 2026 8:40 a.m. PST |
I have a Bambu A1 and like it. It was my second 3D printer and a huge upgrade over my Creality CR6-SE. It's pretty trouble free and easy to use. With proper profiles it can print decent minis and terrain is no problem. The only thing I don't like is that Bambu is trying to limit what slicers you can use. I haven't updated my firmware for ages and use Orcaslicer. Not sure if someone solved that issue recently. |
Micman  | 16 Nov 2026 9:04 a.m. PST |
Things to consider, do you need multi color prints(most likely not for terrain but does anyone else in the house have the need?). What material are you going to print with. PLA, ABS wood fiber? I have heard good things about the A1. Have fun! |
| The Gonk | 16 Nov 2026 9:10 a.m. PST |
I went for the P2S combo. I have been very happy and successful with it. I do a fair bit of printing with a 0.2 mm nozzle-- buy some extras, though, they're tough to clear clogs on. My previous experience was the Creality Ender 3. I was very unhappy with that. |
martin goddard  | 16 Nov 2026 9:27 a.m. PST |
The Bambu P2S comes in nice enclosure . This makes it quieter and tidier. The p2S combi (printer + reel holder) is excellent and it has nice software/slicer as well. The reel holder holds 4 colours nicely. Recommended. martin |
| Logan1969 | 16 Nov 2026 10:44 a.m. PST |
That Bambu P2S is a little out of my price range and I think it's too pricey for a first timer. |
| Andrew Walters | 16 Nov 2026 10:48 a.m. PST |
Everyone is going to say Bambu, and a lot of people love them. I think that's the can't go wrong choice. But I'm not sure I like how they do certain things and I'm a Creality fan. I got an Ender 3 V3 refurb from eBay with manufacturer's warranty for $160 USD and I absolutely love it. |
|