"Basing with a static grass applicator question." Topic
3 Posts
All members in good standing are free to post here. Opinions expressed here are solely those of the posters, and have not been cleared with nor are they endorsed by The Miniatures Page.
Please remember that some of our members are children, and act appropriately.
For more information, see the TMP FAQ.
Back to the Basing Message Board
Areas of InterestGeneral
Featured Hobby News Article
Featured Link
Featured Ruleset Rating:
Featured Showcase Article
Featured Profile Article
Current Poll
|
MrZorro | 11 Feb 2021 8:25 a.m. PST |
Hi guys, what is the best methodology for applying static grass to 28mm figure bases with figure glued using a static grass applicator? Any advice is welcome. thanks, cheers! |
Prince Alberts Revenge | 11 Feb 2021 11:04 a.m. PST |
I have the yellow plastic static grass applicator the size of a flask and use that for my figure bases with very good results: 1) Apply white glue to the figure base. 2) Fill bottle about halfway and shake it in various motions for about 20-30 seconds. 3) hold figure over a newspaper or large bowl and use other hand to hold bottle inverted and puff the grass onto the base. Once it's thoroughly covered the base I gently blow on the grass, hold the figure upside down and tap the bottom of the base gently. All done! |
John Leahy | 11 Feb 2021 12:11 p.m. PST |
He appear to have a static grass applicator. We discussed this yesterday. Making tufts would look to be a better option. Use parchment paper taped to a cookie sheet or metal tray. Use white glue in whatever shape/size you want. Lightly sweep back and forth. Swap between grass colors as you choose. Let dry then peel off. Hth, John |
|