
"Rocky Scatter Terrain" Topic
11 Posts
All members in good standing are free to post here. Opinions expressed here are solely those of the posters, and have not been cleared with nor are they endorsed by The Miniatures Page.
In order to respect possible copyright issues, when quoting from a book or article, please quote no more than three paragraphs.
For more information, see the TMP FAQ.
Back to the Terrain and Scenics Message Board Back to the Blogs of War Message Board
Areas of InterestGeneral
Featured Hobby News Article
Featured Link
Featured Showcase Article Sometimes at a convention, you can be just dead lucky and find a real bargain.
Featured Workbench Article Using pink stuff for basework.
Featured Profile Article Can sea creatures fit into your wargaming plans?
Current Poll
|
yarr68 | 13 Jan 2021 3:49 p.m. PST |
Painted up some Rocky Terrain using Railway Model Plaster casts. They're a bit fragile, but I'm very plsead with how they came out. For more pics, check out my blog. link
|
Herkybird  | 13 Jan 2021 3:58 p.m. PST |
|
Gear Pilot | 13 Jan 2021 4:02 p.m. PST |
Agree, those are very nice. |
Baranovich | 13 Jan 2021 4:49 p.m. PST |
|
Extrabio1947  | 13 Jan 2021 5:39 p.m. PST |
|
Oberlindes Sol LIC  | 13 Jan 2021 8:42 p.m. PST |
|
Perris0707  | 13 Jan 2021 8:43 p.m. PST |
|
Extra Crispy  | 14 Jan 2021 8:36 a.m. PST |
Lovely. For smaller scale stuff if you buy a bag of the chunky mulch you can paint the bigger chips – use cheap house paint or craft paint – and get a similar result that is VERY durable! |
Zeelow | 16 Jan 2021 10:57 a.m. PST |
Excellent, Ray. Capt. Zeelow |
yarr68 | 16 Jan 2021 3:11 p.m. PST |
|
Warspite1 | 03 Feb 2021 8:22 a.m. PST |
When working with plaster I have learned to let the plaster dry thoroughly – leave it over a radiator or pop it in a warm oven after cooking has finished – then give the plaster one thin coat of watered down PVA white glue, let that dry, and then give it a thicker coat and let that dry. Make the last coat around 50:50 glue and water. This hardens the plaster with a plastic coat and makes it less liable to chip or break. If not glueing to a base, make sure you treat the underside of the plaster casting as well. As a belt and braces measure you could try a coat of varnish after painting and weathering and finally spray matt varnish before flocking and texturing. Borrowing an idea from the construction industry… and I have never tried this so I am guessing… a larger casting could be made more robust by laying steel wire or straightened out paper clips into it, like ferro-concrete. Another idea might be to incorporate a plastic mesh into the base of a large free-standing casting, this might make it less liable to snap. Personally I would still use an MDF or poly board base to support a casting but the above method MIGHT help a free-standing casting and thus prevent a snap. No guarantees, so experiment! Barry |
|