Saber6 | 20 Jan 2020 10:54 a.m. PST |
Does anyone have a source? STL would work as well. I may need 'lots' |
Royal Air Force | 20 Jan 2020 2:48 p.m. PST |
|
Saber6 | 20 Jan 2020 3:33 p.m. PST |
Close. Don't need the numbers and the raised part needs to be on the 'hour' so to speak |
Royal Air Force | 20 Jan 2020 4:43 p.m. PST |
How about this one in Tinkercad? link Might provide a starting point anyway. If it's close, I can try modding it. |
Saber6 | 21 Jan 2020 8:52 a.m. PST |
RAF, thanks! Needs 30 degree markings (clockface). |
Royal Air Force | 21 Jan 2020 11:40 a.m. PST |
Left me see what I can do, I will post a link here when done. |
TheBeast | 21 Jan 2020 5:17 p.m. PST |
FT 2.5 is clockface, though you didn't ask for that specifically. FT 2 requires four extra in-between, which is closest to CMD footings, one every three 'spaces'. Long ago, I kept looking for poker chips with markings dividing the circle into 24 parts. 25 was as close as I got; I still gibber a bit, now and then, now and then… RAF, do let us know how it goes! Doug |
Royal Air Force | 21 Jan 2020 7:54 p.m. PST |
Check this out. link Doug, I can subdivide it if needed |
Saber6 | 22 Jan 2020 9:50 a.m. PST |
|
TheBeast | 22 Jan 2020 11:34 a.m. PST |
Doug, I can subdivide it if needed That's okay; I'm fine with 2.5… ;->= I'll have to give it a try. Thanks! PS that occurred before I submitted: If I WERE to ask for adjustment, it would be varying the 'tics', every other one, short-long-short-etc. FT2.5 uses 30 degree turning but 60 fire arcs. Doug |
Royal Air Force | 22 Jan 2020 1:33 p.m. PST |
Ask and you shall receive, added a one with alternate tics |
Saber6 | 22 Jan 2020 1:51 p.m. PST |
Just WOW. The power of the interwebs |