"Removing vini vedi decals" Topic
6 Posts
All members in good standing are free to post here. Opinions expressed here are solely those of the posters, and have not been cleared with nor are they endorsed by The Miniatures Page.
Please remember not to make new product announcements on the forum. Our advertisers pay for the privilege of making such announcements.
For more information, see the TMP FAQ.
Back to the Painting Message Board
Areas of InterestGeneral
Featured Hobby News Article
Featured Link
Featured Ruleset
Featured Showcase Article
Featured Workbench Article Could artificial intelligence take a photo of an unpainted figure and produce a 'painted' result?
Current Poll
|
| barcah2001 | 05 Oct 2018 12:47 p.m. PST |
Whoops, put the wrong shield decal on my 28mm knight.
Is there an easy way to remove it so I can replace it with the correct
One?
Mark |
| skipper John | 05 Oct 2018 12:54 p.m. PST |
I would think "decal solvent solution" would loosen it up. ebay has "Model Masters." |
| Wherethestreetshavnoname | 05 Oct 2018 1:07 p.m. PST |
They're waterslide decals. Use warm water with a drop of washing up liquid. |
| Chris Wimbrow | 06 Oct 2018 2:26 a.m. PST |
If you haven't yet sealed it with a clear coat, some masking or clear tape might do the trick. Mash it on tight and take it off slowly. It may come off in pieces so could take several tries. |
| Chris Wimbrow | 06 Oct 2018 2:37 a.m. PST |
I save the prescription pill bottle/containers (the transparent orange type) for miscellaneous small bits storage. The labels can be tenacious to get off. But some Scotch Tape pulls up the scraps and glue using fresh strips of it as they get clogged. |
| barcah2001 | 07 Oct 2018 1:39 p.m. PST |
Thank you for the tips—giving them a try now |
|
goes to sea with the Terrain Mat.