"LUCHS Propeller position" Topic
4 Posts
All members in good standing are free to post here. Opinions expressed here are solely those of the posters, and have not been cleared with nor are they endorsed by The Miniatures Page.
Remember that you can Stifle members so that you don't have to read their posts.
For more information, see the TMP FAQ.
Back to the Modern Discussion (1946 to 2014) Message Board
Action Log
29 Aug 2018 7:21 p.m. PST
by Editor in Chief Bill
- Changed title from "LUCHS Proppeller position" to "LUCHS Propeller position"
Areas of InterestModern
Featured Hobby News Article
Featured Link
Featured Showcase Article
Featured Workbench Article With clean lines and not a lot of clutter, Minidragon  says these figures are a painter's dream!
Featured Book Review
|
| UshCha | 29 Aug 2018 1:24 p.m. PST |
So in the images, the propellers are forward of their mounting and sometimes to the rear. Does the prop rotate 180 to protect itself when not in use, rotation putting further under the vehicle. Link at 10 seconds shows prop pointing forward. YouTube link |
| Thresher01 | 29 Aug 2018 4:31 p.m. PST |
Can't tell you. For a waterline model, it won't matter…… ;-) |
| UshCha | 30 Aug 2018 12:20 a.m. PST |
Thresher. It matters I somtimes do models both in and out! Miht be hard with this one as the trim vane is the only bit visible for a bit of the bow. Hard to connect it invisibly without a base, I hate bases! |
| Thresher01 | 30 Aug 2018 5:32 p.m. PST |
I get that. You could do a thin base the same size as the width of the vehicle though, and perhaps a little water texture between it and the rest of the hull. Sorry I can't help on the props. I suggest a Google images search for the Luchs details you seek. Alternatively, ask over on the Lead Adventure site. Might find someone there who actually served in one. |
|
