ComisarioSam | 29 Aug 2017 7:00 a.m. PST |
Hello everyone at The miniatures page! We are so glad to come back with a new project, the Elven Lords, our High elves army. Now that our first Kickstarter, TMP link Reichguard knights, is finished is time to take a new challenge. The Elven Lords are a two multipose infantry regiment and two monopose foot chareacters. We are still workin in 3d sculpting and master molds work. But we can start to show here our firts models. This is a concep our our havey armoured elf, the beggining of everything.
Our spearmen have more than nine pieces.
An Spearman 3D model.
You can read more information even see our 360º video in our blog at: lastsword.com/en/high-efl-spearmen-introduction We would like to launch our project as soon as possible, but still have much work to do it! We will keep posting here the news! What do you think about out project? |
Hydra Studios | 29 Aug 2017 7:46 a.m. PST |
These look great! two questions: 1) Are they going to be metal, resin, or injection molded plastic? 2) Are they going to scale compatible with the later plastic GW High Elves from Isle of Blood (Lothern Sea Guard, Swordmasters of Hoeth)? |
Huscarle | 29 Aug 2017 10:17 a.m. PST |
They look fine apart from those awful shoulder pads. IMHO they would look better if they were more like plate armour shoulders. Good luck with the KS. |
ComisarioSam | 29 Aug 2017 3:16 p.m. PST |
Thanks guys for your comments. Hydra, about your questions. This project will be like Reichguard kickstarter. We gonna use plastic resin for the infantry and metal for foot charaters. This is our spear:
This is our referent:
We expect that scale will be compatible with others elfs branchs. The main problem is, into a range, like GW range, figures have different scale. Anyway we gonna publish scale test pictures soon. Huscarle, we have been looking something different for the shoulder pads. It is a shame if we couldn´t desing something that you like, sorry. Anyway, we use the shoulder pads to cover all joints, so you can do a lots of poses with the figures with out green stuff. Thanks again guys. |
ComisarioSam | 31 Aug 2017 10:34 a.m. PST |
We have been working in Bowmen, as a second regiment. This is a T 3D model, with out a pose.
What do you think about it? |
David Johansen | 02 Sep 2017 10:34 p.m. PST |
Nice, but plastic resin sucks. |
ComisarioSam | 13 Sep 2017 9:37 a.m. PST |
Hi David. Why don't you like plastic resin? Wich plastic resin figures have you got? I am just wondering, because I would like know all points of view ;) Thank you for your comment! |
Thomas Thomas | 14 Sep 2017 9:31 a.m. PST |
As to your reference there is now a considerable school of thought the Hoplites did not use an over hand grip. Its impractical and period representations of over hand grips are probably of javlin armed troops. But maybe Elves figured out how to do it… TomT |
ComisarioSam | 20 Sep 2017 11:00 a.m. PST |
Thomas, we loke historial models, but right know we are sculping fantasy, so wedon't really need be too stric. By the way nobody is really sure the way that they use their weapons, over the shield, under the shield, both… Anyway thank you for your comment ;) Last weekend we were at Freak Wars 2017 show in Spain. Some people saw our casted models:
We are nearly to can launch our kickstarter. |
ComisarioSam | 01 Oct 2017 3:30 a.m. PST |
|
ComisarioSam | 02 Oct 2017 9:32 a.m. PST |
Our Kickstarter is on now! Besides we have published new pictures of our elven archers.
Our article: link I hope that you like! |
ComisarioSam | 05 Oct 2017 12:06 p.m. PST |
Hi guys. We are really sorry to say that we have canceled our Kickstarter. We weren't getting good result. All our money is invested in that project, so we going to rebuilt it again and launch again in a few weeks. Sorroy about that, and thank for your support! |
ComisarioSam | 23 Oct 2017 3:00 a.m. PST |
We are still working in our Elven Lords. Last days we have crafted 100 models to check our production molds. Nowadays we are painting, and we are not sure with the color of the helmets hears. Wich color do you think looks better?
Thanks guys for your oppinion!
|
ComisarioSam | 26 Oct 2017 8:45 a.m. PST |
Still painting!!!
Some people was afraid about how figures will fit in a regiment. This is an example
|
ComisarioSam | 20 Nov 2017 5:18 a.m. PST |
Hello everyone at the Miniatures page. We have been doing a new small board to take pictures of our Elven Lords miniatures.
You can see more pictures at: lastsword.com/en/elven-lords-board/ I hope that you like. |
Alxbates | 20 Nov 2017 6:43 a.m. PST |
I love how that stairwell is coming along. Nice work! |
ComisarioSam | 20 Nov 2017 10:18 a.m. PST |
Thank you for your comment Alxbates! |
Keifer113 | 20 Nov 2017 8:37 p.m. PST |
|
ComisarioSam | 21 Nov 2017 3:35 a.m. PST |
The board is 30x30cm, our scale is 28-32. |
ComisarioSam | 25 Nov 2017 8:08 a.m. PST |
We are nearly finish to relaunch our kickstarter.
|
ComisarioSam | 29 Nov 2017 11:19 a.m. PST |
Hello guys, we have our Kickstarted presentation done. It will be running from December 1srt to December 17th.
link I hope that you like! |
ComisarioSam | 01 Dec 2017 12:27 p.m. PST |
|
ComisarioSam | 04 Dec 2017 6:18 a.m. PST |
Kicstarter is running!! Our Elf Prince stretch goals has been unlocked!! What is next? Command Squad' sprue . This is some pictures of our Prince.
If you wish to see a 360º video, check our blog: link Thank you guys for your support! |
ComisarioSam | 07 Dec 2017 5:29 a.m. PST |
We have a new 360 video of our Drako banner!
Check our at the article: link |
ComisarioSam | 11 Dec 2017 12:58 p.m. PST |
Today we have a lots news!! Firstly, The great hall, sorry.. The ruined hall!
Check more images and a 360º videos at: link Furthermore Kickstarter news!
I hope that you like it! |
ComisarioSam | 14 Dec 2017 8:06 a.m. PST |
Hi guys. First some news from the kickstarter. We have new addons.
link And an imagen of our elf mage.
link You can check more images and a 360º video at: link
Tx guys! |
David Johansen | 18 Dec 2017 8:12 a.m. PST |
huh, forgot I'd posted on this one. So, I've worked with Mantic and Prodos's plastic resin and while the Prodos stuff is the nicest resin I've ever worked with, it's still resin. It takes glue and paint poorly. The paint often has to be thick enough to obscure details if you want it to stick to the model. There are also the mould lines and bubbles to deal with. I spent some time last week explaining to a customer who was looking for metal figures to use with Hero Quest that plastic is now the gold standard of the industry. He was incredulous but that's how it is. |
ComisarioSam | 18 Dec 2017 9:50 a.m. PST |
Hello David! Yahk you for your comment. Our plastic is not like other resins that we have seen before. You won't have any problem to glue our product, even you can pain it with out a base coat. We have sent some samples. In this topic, you can read about Arraed experience the-ninth-age.com/index.php?thread/28870-elven-lords-kickstarter-on-lastsword-miniatures/&postID=836867#post836867 Our plastic resin is flexible enough to prevent miniatures from being damaged by bending. Even the paint.
If you are still not sure, I can send to you a sample and get them your honestly opinion ;) By the way The Kickstarter campaign is over. Now is time for the Pledge Manager. If anybody has missed the campaign can wtrite to us at: hello@lastsword.com
|
ComisarioSam | 06 Feb 2018 11:44 a.m. PST |
Hi guys, Firstly I would like to say sorry. It been a long time out from here but we are living bad times. Ulrich is in hospital for a surgery and a relative has passed away so… we can not be 100% focus on that. As we said on Kickstarter, orders will be delayed, anyway we hope be able to send all parcels in March. We have some deadleines to announce: [list] [li]The 9th of February Kickstarter and Late Pledge orders to be taken at Hispania Wargames 2018 show, must be done please.[/li] [li]The 24th and 25th of February Lastsword will be at Hispania Wargames 2018 show with a stand. You will get all our products and a few ammount of Elven Lords going to be offer there.[/li] [li]The 6th or March we gonna close Kickstarter and Late Pledge, so it won't be able to place new orders. Then we will be doing and sending parcels.[/li] [/list] Little by little we gonna take back the blog and publish new articles. Thank you guys. Whatever that you can need, just drop a message at: hello@lastsword.com Take care! |