Help support TMP


" Silent Death 3-to-1 models." Topic


13 Posts

All members in good standing are free to post here. Opinions expressed here are solely those of the posters, and have not been cleared with nor are they endorsed by The Miniatures Page.

For more information, see the TMP FAQ.


Back to the SF Discussion Message Board



450 hits since 18 May 2017
©1994-2017 Bill Armintrout
Comments or corrections?

JOHN CSONKA18 May 2017 11:25 p.m. PST

DELETED

JOHN CSONKA18 May 2017 11:25 p.m. PST

DELETED

JOHN CSONKA18 May 2017 11:26 p.m. PST

Any news about when the 3-to-1 models will be coming out in 2017 ?

John

Mako11 Supporting Member of TMP18 May 2017 11:47 p.m. PST

3:1?

Does that mean 3X bigger?

JOHN CSONKA19 May 2017 1:16 a.m. PST

Yes. Resin miniatures three times bigger….See Metal express web site….or here…

link

John Csonka

JOHN CSONKA19 May 2017 1:20 a.m. PST

Here are some Pictures…..http://www.redshirtgames.com/sd.htm

Random Die Roll Supporting Member of TMP19 May 2017 8:44 a.m. PST

So at 3:1 will this be closer to an X-Wing scale??

Mako11 Supporting Member of TMP19 May 2017 11:55 a.m. PST

Thanks for the info.

BlackWidowPilot Supporting Member of TMP Fezian20 May 2017 1:47 a.m. PST

Bigger than X-Wing, and we're still dealing with some other preliminary projects…

Most likely we'll resort to a kickstarter to see if there's enough interest. The good news is is that we have masters already for most of the Core Ships plus extras including Draconian, Brood, and a number of House specials.

The bad news is is that we don't have a Night Hawk of all things, so we'd be seeking to line up a sculptor/model maker to produce a master for that essential flying six-gun killer, and most likely make it a stretch goal if/when we run a kickstarter.

Leland R. Erickson
Metal Express
metal-express.net

JOHN CSONKA20 May 2017 9:58 a.m. PST

Can you give a rough date when these will come to kick starter Leland ?

John

BlackWidowPilot Supporting Member of TMP Fezian20 May 2017 11:43 p.m. PST

John,

wish to Hell I could be more specific at this point, but until I can pow wow with my two partners in crime, and until I pin down with 100% certainty who will be handling the resin production, I have to leave it at some time probably in the third or fourth quarter of this year…

Hope to have a more definite date, etc. nailed down if not by month's end, then by next month at some point for sure. It is low hanging fruits as it were, if there's enough interest and we get a producer lined up who is game for the party (and reliable!).


Leland R. Erickson
Metal Express
metal-express.net

JOHN CSONKA21 May 2017 8:25 a.m. PST

Thanks for the reply Leland. Looking forward to the kick starter.

John

infojunky25 May 2017 7:49 p.m. PST

Hey Leland! check the address in your Signature. It is a dead link.

What is the figure scale of SD ships?

BlackWidowPilot Supporting Member of TMP Fezian26 May 2017 11:07 a.m. PST

Ack! Silly me! Old habits die hard. The correct addy: silent-death.mx

And by scale if you mean the metal fighter minis, it's circa 1/450 scale. The 3 to 1 models are circa 1/115 scale, and frankly, more than a few are still large enough to work for 15mm figures with little or no modifications.


Leland R. Erickson
Metal Express
silent-death.mx

infojunky27 May 2017 3:04 p.m. PST

I was asking about the metal ones….

Though I am still interested in the 3 to 1 models…

Sorry - only verified members can post on the forums.