Help support TMP


"some stuff I printed from thingiverse 28mm scaled" Topic


9 Posts

All members in good standing are free to post here. Opinions expressed here are solely those of the posters, and have not been cleared with nor are they endorsed by The Miniatures Page.

For more information, see the TMP FAQ.


Back to the Modern Gallery Message Board

Back to the Pulp Gaming Message Board

Back to the 28mm Sci-Fi Message Board

Back to the 3D Printing Message Board



872 hits since 12 Feb 2017
©1994-2017 Bill Armintrout
Comments or corrections?

R Lee S Supporting Member of TMP12 Feb 2017 8:35 p.m. PST

[URL=http://s182.photobucket.com/user/RLee_photos/media/IMAG1050_zpsbs0xxpfi.jpg.html]

[/URL]
[URL=http://s182.photobucket.com/user/RLee_photos/media/IMAG0555_zpssfrcsvfd.jpg.html]
[/URL]
[URL=http://s182.photobucket.com/user/RLee_photos/media/IMAG0557_zpssktlnid1.jpg.html]
[/URL]
shapeway item or two here along with a thingiverse item
[URL=http://s182.photobucket.com/user/RLee_photos/media/IMAG0439_zpskx5uzljt.jpg.html]
[/URL]

Personal logo Bashytubits Supporting Member of TMP13 Feb 2017 12:20 a.m. PST

I sense the presence of G.I. Joe.

R Lee S Supporting Member of TMP13 Feb 2017 4:17 a.m. PST

dose seem that way

Rodrick Campbell Sponsoring Member of TMP Fezian13 Feb 2017 6:06 a.m. PST

Yo, Joe!

Pretty cool.

R Lee S Supporting Member of TMP13 Feb 2017 5:39 p.m. PST

thanks for the compliment, Rodrick Campbell

Ivan DBA13 Feb 2017 7:13 p.m. PST

Looks like some Real American Heroes!! Very cool.

Personal logo chicklewis Supporting Member of TMP13 Feb 2017 11:06 p.m. PST

Way great flamin' wonderful !!

BigNickR14 Feb 2017 8:03 a.m. PST

Love the Killer Whale hovercraft and the Hawk VTOL!

where are the links to the files?

R Lee S Supporting Member of TMP14 Feb 2017 10:20 a.m. PST

heres the link to the files I used. they are all based on the actual toys at 100%. so to use them for wargaming they need to be printed at a fraction of there file size. a vamp size or smaller is 36% and the mobat, rattler and larger size look better at 45%. thats for 28mm wargaming the guy who created the files prints them at 25% to be used in 15mm games

link

so far I have about half of them printed and in various stages of preped/painted. on a side note there printed in pvc plastic. I go over the with a dremal tool on lowest setting and a sander to remove at least some of the line and then hit them with WET sand paper to help reduce the lines even more and give some of it a smooth surface. it's slow going, but I spent a few hours sanding the Rattler and I'm happy with the reduction in lines. I really should have spent more time preping the killer whale before painting it.

Sorry - only verified members can post on the forums.