mgdavey | 23 Sep 2015 10:43 a.m. PST |
I recently acquired some used painted figures that have literally collected a lot of dust. Some of them are pretty filthy. Does anyone have any experience cleaning painted minis they could share? Thanks. |
nnascati | 23 Sep 2015 10:46 a.m. PST |
I'd suggest one of those aerosol sprays designed for cleaning computer keyboards, along with a soft brush. |
45thdiv | 23 Sep 2015 10:51 a.m. PST |
Tilt them under running water from a sink. Just a quick swipe should get the dust off. It will not damage the figures paint. Just don't soak them |
Denouement | 23 Sep 2015 10:52 a.m. PST |
I lightly dust using a very high quality make-up brush, (fine hairs). Off the top of my head, this cost £14.00 GBP Stuart. :-) |
Marshal Mark | 23 Sep 2015 11:34 a.m. PST |
I have washed dusty figures by submerging them in water, with no problems. Obviously it depends on how they are based and whether you want to keep the basing, but water shouldn't take any paint off. |
Doctor X | 23 Sep 2015 11:39 a.m. PST |
I use a huge fluffy brush designed for pastels. Works great. |
Brian Smaller | 23 Sep 2015 12:54 p.m. PST |
I had a puffer brush used for camera lens cleaning. Super soft bristles and a squeeze bulb that puffed air through the bristles. |
Henry Martini | 23 Sep 2015 5:42 p.m. PST |
If figures have been sitting long enough to gather a substantial coating of dust I place them on the lawn on a sunny day, set the hose on the more powerful of the two shower settings, and give them a thorough spray from all angles. Then it's just a matter of leaving them in the sun to dry. |
Pictors Studio | 23 Sep 2015 8:40 p.m. PST |
I do what 45th Div does, just run them under the running water from the sink. |
Fish | 24 Sep 2015 4:16 a.m. PST |
|
leidang | 24 Sep 2015 9:08 a.m. PST |
Soft Brush and or pressurized Air. Both work very well. |
uglyfatbloke | 14 Nov 2015 12:51 p.m. PST |
dip an old electric tooth brush- one where the bristled have become well-splayed – in warm water to soften the bristles and run it GENTLY over the figures. Let them dry overnight under a plastic box or similar to prevent a fresh layer of dust and then use a puffer brush. |