"Weathering a Sherman" Topic
7 Posts
All members in good standing are free to post here. Opinions expressed here are solely those of the posters, and have not been cleared with nor are they endorsed by The Miniatures Page.
Remember that you can Stifle members so that you don't have to read their posts.
For more information, see the TMP FAQ.
Back to the WWII Painting Guides Message Board Back to the WWII Land Gallery Message Board
Areas of InterestWorld War Two on the Land
Featured Hobby News Article
Featured Link
Top-Rated Ruleset
Featured Showcase Article
Featured Workbench Article
Featured Profile ArticleDesert Rats assault a line of dreaded 88s - from the rear!
|
Triccor | 29 Oct 2014 5:20 p.m. PST |
After more years spending to drybrush my models, I decided to apply new weathering techniques to give more life to a Sherman OP tank. So I apply a couple of filters, an oil burnt umber wash, a dot wash with oil colours and weathering powder on wet surface by thinner. The result is in my blog: triccor2.blogspot.it This approach is very expensive for models used in a wargame, but I love the realistic aspect of such a tank! Welcome every comments! Enjoy!!! Emanuele |
dmebust | 29 Oct 2014 5:53 p.m. PST |
Look nice. I like your German infantry as well. Nice job on the Medic. |
McWong73 | 29 Oct 2014 7:18 p.m. PST |
You've got the technique down superbly. You considered doing some coats of grime and mud to give more contrast to the weathering? |
steamingdave47 | 30 Oct 2014 3:01 p.m. PST |
Seen several recent references to the use of "filters" when painting AFVs. I have been painting figures for nearly 50 years and have no idea what is meant by "filters" in this context. Can someone enlighten me please? |
Triccor | 30 Oct 2014 4:46 p.m. PST |
Thank you for you feedback. I'll improve my work by the addition of mud and dry pigment on the lower part of the tank to simulate dust. Check my blog to see the progress. In order to answer to steamingdave47, the filter consists to alter the tone of base coat by using specific product (i.e. filters from Sin Industries) or very thinned oil color, in order to obtain a very realistic aspect. On my Sherman I used the burn umber oil on the green base. An interesting article on filter and wash is at the link below: link In my experience I know that this tecnique is used on both vehicle and tank. I hope this can be helpful. Emanuele |
steamingdave47 | 02 Nov 2014 4:29 a.m. PST |
Thanks Emanuele; now I understand what it is, I realise I have been using the technique, accidentally, already. Will now be able to do it in a more controlled way in the future. Look forward to seeing more of your excellent work. |
tuscaloosa | 02 Nov 2014 6:16 p.m. PST |
Nice work on the Shermans. |
|