"Humber Scout cars - soon to be released" Topic
10 Posts
All members in good standing are free to post here. Opinions expressed here are solely those of the posters, and have not been cleared with nor are they endorsed by The Miniatures Page.
Please don't make fun of others' membernames.
For more information, see the TMP FAQ.
Back to the 20mm WWII Message Board
Areas of InterestWorld War Two on the Land
Featured Hobby News Article
Featured Link
Top-Rated Ruleset
Featured Showcase ArticlePistol-waving command figures.
Featured Workbench ArticleNow that the 20mm Finns are painted, how to base them?
Featured Profile Article
Featured Book Review
|
Von Miligan | 17 Jan 2014 2:51 a.m. PST |
These are 2 of the Humber scout cars we will be releasing soon.
Its a sneak glimpse into things coming out in the near future. Small number of parts, 3 actually – see below. Offering for the first time a 2 minute build time!!!!
These will come with different crews and 1 with a twin vickers K on a pintal mount plus the other model a Bren on a swinging mount. Looking at selling as a pair of models, total of 6 parts for both models for around £12.00 GBP – to be decided? Thoughts? Paul and Ian at the 20mmzone
|
Bill Slavin | 17 Jan 2014 7:09 a.m. PST |
Thoughts? I'm thinking i now need to wait on ordering my Dingos until these are available! |
wargamer10 | 18 Jan 2014 5:50 a.m. PST |
Paul/Ian, are these metal or resin/metal combo ? They look really sweet by the way. The armoured cars and the MG mountings! |
ridgeback123 | 18 Jan 2014 8:16 a.m. PST |
These like the Dingo's are all metal. I/We were talking about producing in rein & even did some test castings but the response suggested the demand for this product was going to be so high that that the time element in casting them in resin although costing less in material was far out weighed by the time/labour element in casting in metal. With this in mind several of the "Small "Skytrex stuff we be re-moulded & Re-released in metal Ian ( 20mmZone & ShellHole ) |
wargamer10 | 19 Jan 2014 10:42 a.m. PST |
Thanks for the reply Ian. While I appreciate the commercial reasons for the choice of metal in these cases, I would have been happy to wait for the resin versions. Can I take it from your reply that the resin tests showed no drop in quality ? |
ridgeback123 | 20 Jan 2014 12:28 a.m. PST |
No drop at all. its just in resin I could make 2 sets a day with limited mould life & in metal I can do 20 sets with double the mould life. Ian ( 20mmZone & Shell Hole ) |
Bill Slavin | 20 Feb 2014 7:20 a.m. PST |
Okay, how soon? My order is waiting on these! |
ridgeback123 | 20 Feb 2014 1:12 p.m. PST |
hope to release at On Track weekend after next Ian ( 20mmZone & Shell Hole ) |
Bill Slavin | 20 Feb 2014 6:02 p.m. PST |
Thanks for the info. I will be patient. |
ridgeback123 | 27 Feb 2014 3:24 p.m. PST |
Can confirm they are ready & will be in the Web store on Monday & will be at On Track this weekend. Ian |
|