| Lion in the Stars | 20 May 2013 12:02 p.m. PST |
Ok, who makes tanks and arty like the drawings in the Colonial Marines Tech Manual? I know Khurasan and Antenociti make APCs, but I'm looking for a bit of heavier support than Dropship+APC. |
| AVAMANGO | 20 May 2013 12:19 p.m. PST |
I would with something like the Khurasan Miniatures Medium tracked tank below for the Colonial Marines M22 Jackson tank, just find alternative angular main gun barrel.
|
| zonk76 | 20 May 2013 1:02 p.m. PST |
|
| Mako11 | 20 May 2013 1:17 p.m. PST |
Or, just a plain old Merkava tank. |
| LordNth | 20 May 2013 3:04 p.m. PST |
Darn if that illustration doesn't look just like the Bengal MBT from DLD Productions. |
| JRacel | 20 May 2013 4:15 p.m. PST |
If you mean like the ones below, only DLD did something very close to the pictures. Many other good tanks, but the DLD ones were almost spot on.
Jeff |
| Lion in the Stars | 20 May 2013 5:22 p.m. PST |
Or, just a plain old Merkava tank. Turret is too far forward for the M22, M34, or M40. (Note that the M34 picture isn't in the new release of the tech manual. It's the only difference that I've found between the two releases!) I'd remembered that DLD was said to make the closest, but as long as DLD is out of production… |
| Mako11 | 20 May 2013 6:22 p.m. PST |
No reason you can't move the turret to the rear, with just a little work on the Merkava hull. |
| Augustus | 20 May 2013 7:50 p.m. PST |
|
| John Treadaway | 20 May 2013 11:08 p.m. PST |
Keep your powder dry 'till you see what Antenociti are going to do.
tanks (Jackson/Ridgeway) and arty to follow soon (I'm told) John T |
| Mako11 | 21 May 2013 1:00 a.m. PST |
Love the look of that vehicle, and the scorpion emblem is a very nice touch, too. |
| John Treadaway | 21 May 2013 1:21 a.m. PST |
Glad you spotted the scorpion Mako! It's easy to lose small decals in te camo and the dirt! John T |
| Jerrod | 21 May 2013 2:06 a.m. PST |
Yup, the Jackson the Ridgeway and the M292 are in the pipe for F.A.T.C. I believe that Jed is due to finish the 3D work this week for passing over to be printed by FATC. (however he is off ill atm so there may be a minor delay) /Dee |
| Lion in the Stars | 25 May 2013 8:49 a.m. PST |
Oh, alright! Not like I wasn't going to have another order or three for more 28mm stuff anyway… |
