Undefire Wargames | 25 Apr 2013 1:07 p.m. PST |
Hey guys sorry if this is in the wrong section , i am just interested if anyone knows of or could recromend me a good experinced casting company that is located in north america. I know of a few in the UK , but i have not been able to find any caster in north america let alone canada. If anyone knows of or can recromend a good Metal caster in North America i would greatly appreciate it!?. |
Jlundberg | 25 Apr 2013 1:10 p.m. PST |
I think Lon casts some of his stuff from Brigade |
ArchitectsofWar | 25 Apr 2013 1:46 p.m. PST |
|
RavenscraftCybernetics | 25 Apr 2013 1:47 p.m. PST |
you coouldnt find Iron Wind Metals? TMP link |
John the OFM | 25 Apr 2013 2:25 p.m. PST |
|
PJ Parent | 25 Apr 2013 2:44 p.m. PST |
What side of Canada are you on? |
javelin98 | 25 Apr 2013 3:20 p.m. PST |
Here's a site that Google turned up: link They're in Wisconsin, so that might meet your criteria. |
Pattus Magnus | 25 Apr 2013 3:59 p.m. PST |
I know RAFM/Silver Fox Productions does contract casting for Trey Corbies Miniatures. rafm.com/contact They're in Ontario. |
Meiczyslaw | 25 Apr 2013 4:20 p.m. PST |
Reaper used to do contract work. They might still, if you drive enough money to their front door. Probably not what you're looking for, but I figured it was worth a mention if it was. |
CraigH | 25 Apr 2013 4:41 p.m. PST |
Another vote for RAFM in Brantford, Ontario, they seem to know what they are doing |
Chef Lackey Rich | 25 Apr 2013 5:13 p.m. PST |
|
nothing | 25 Apr 2013 5:35 p.m. PST |
|
Dances With Words | 25 Apr 2013 7:02 p.m. PST |
|
Pictors Studio | 25 Apr 2013 9:42 p.m. PST |
The guys at Old Glory are real professionals. Terry has been doing his job making molds for 23 years now. Scott is very exacting in his work and attention to detail. You really can't go wrong with them. |
Undefire Wargames | 26 Apr 2013 12:08 a.m. PST |
RAFM i have found but their email address did not work for some strange reason, so i assumed they were out of date. I am in westren canada, Alberta, i have googled and even yahoo'ed for companies nearer to my area and found no one at all :(!. thanks for the great links guys defo will check them out :)!, due let me know if anyone from my side of the contient does do minaiture casting :)!? |
Ashokmarine | 26 Apr 2013 4:13 a.m. PST |
I had the same problem. Hard to find good casters for some reason. I use Old Glory and I am very please with them. Terry is very good at what he does. Ashok Indus Miniatures |
A Twiningham | 26 Apr 2013 5:08 a.m. PST |
Underfire, have you asked Bob Murch of Pulp Figures who does his casting? I think he is on the same side of Canada and his figures are always nice and cleanly cast, IMO. |
John Da law | 26 Apr 2013 9:29 a.m. PST |
Yeah i use Valiant like Chief mentioned above. They do great work with all sizes. |
Failure16 | 26 Apr 2013 1:50 p.m. PST |
I know that C-in-C ( pfc-cinc.com/front_page.html ) is in Minneapolis, MN. They are primarily 6mm, but they make really high quality (and still affordable) 6mm, so who knows? They have also [relatively] recently started casting models that were sculpted/produced by outside concerns (the SEM line-up). The owner/operator is a top chap, well worth talking to. |
altfritz | 26 Apr 2013 5:27 p.m. PST |
RAFM and Old Glory both get top marks. |
Undefire Wargames | 27 Apr 2013 2:40 p.m. PST |
Thanks for the great responses guys and the great recomendations defaitnly will be contacting these casters here over this weekend, thanks again everyone on TMP!. |
Heisler | 29 Apr 2013 9:12 a.m. PST |
Reaper Miniatures will also do contract casting and packaging |
UnderfireWargames | 13 Jun 2013 10:15 p.m. PST |
Hey Heisler, thanks for that last one as well, very interesting to hear Reaper mini's also does packaging :D! |