| Rassilon | 27 Jul 2011 12:07 p.m. PST |
I see there was a post asking about a Bender figure a year ago, but I thought I would ask again… Does anyone know of a 28mm Bender out there (any of the toys appropriate?) or a 'Not Bender'? Thanks! |
| infojunky | 27 Jul 2011 12:40 p.m. PST |
You might check Black Cat Bases, they have some odd robots. |
| 28mmMan | 27 Jul 2011 12:44 p.m. PST |
I searched…I failed. The only miniature I found was one sold during a convention only.
|
| The Gray Ghost | 27 Jul 2011 1:17 p.m. PST |
Rat Trap has a couple of robots that I think could be cutup to make a Bender
link |
| The Gray Ghost | 27 Jul 2011 1:19 p.m. PST |
Here it is but that's not the right picture. link |
| richarDISNEY | 27 Jul 2011 1:25 p.m. PST |
I go on benders with my 28mm figs all the time…
 |
| Rassilon | 27 Jul 2011 1:33 p.m. PST |
Thanks guys… Gray Ghost… thanks, found the proper pic here: link Hmmm… |
| ming31 | 27 Jul 2011 2:15 p.m. PST |
Doppleganger minis did one Dances with words old company i think |
| The Gray Ghost | 27 Jul 2011 2:56 p.m. PST |
It's the head I'm talking about |
| consectari | 27 Jul 2011 5:23 p.m. PST |
I always wanted a robot for a friend. I'm still looking. |
| jfleisher | 27 Jul 2011 6:50 p.m. PST |
That picture is my "not-bender". I got him at Origins a couple of years ago at the Armorcast booth, might be worth asking them… |
Dances With Words  | 28 Jul 2011 12:41 a.m. PST |
DGUSA did a 'Tie-bot' and the master might be with Black Cat Bases…OR I've not sent it to them yet, (I STILL have a box of masters/brasses and UNRELEASED greens to send their way for molding and casting!!!!) I THINK I've still got some of the ORIGINAL castings in a box of UNSOLD stuff from the 2004/05 ORIGINS conventions, but would have to check. My 'tie-bot' isn't as sleek/as the OTHER 'not-bender' that I believe was done by Brad Shier of Frozen Planet Studios….that was sold to a 'private collector' link Like I said, I'll have to see if any 'Tie-bots' are left, but the epoxy 'green' I did was pretty well trashed in molding and I'd have to re-work it before trying again…. Slishfully, Sgt DWW-btod and Penny |
| Thieses | 28 Jul 2011 6:37 a.m. PST |
Here is the one I have seen on Shape Ways. shapeways.com/model/104885 However at 6 cm it will be too large. I bet you could email the shop owner and have it scaled down. That is the beauty of the 3-D printing of Shape Ways. |
