"10mm Buildings for Vietnam" Topic

I am intending to buy some buildings for my 10mm Pendraken figures. I already have some of the Kennington buildings and have noted comments about how they are more like 6mm scale, having, I suspect, been designed for 1:200 scale figures rather than true 10mm.

I am wary about buying the Time Cast 10mm scale buildings as I would be afraid they will be a lot larger than the figures. I have seen one of their 15mm scale buildings and it looked overscale against a 15mm Peter Pig figure and more suited for a 20mm scale figure. Therefore I am toying with the 6mm scale Time Cast buildings as they may be more suitable for 10mm figures. I have a suspicion that Time Cast buildings may be on the large size for their scale and that 6mm buildings will work well with 10mm figures.

There is always the theory that one should drop down a scale for buildings so they do not take up too much space on the table. On the other hand, I don't want the buidlings to be towered over by the figures and vehicles.

Any thoughts?

I would imagine the Timecast 6mm buildings would be fine. I use the European 6mm buliding with my 10mm stuff for the same reason.

Check out the 6mm ranges from 'The Square'
link

They paint up really nice! How big is a 'hooch' anyway?

I have the Timecast 10mm Vietnam hooches, very nice, well detailed, paint up really well Probably one of, if not the best model terrain building makers around .
I use them for both 10mm and 15mm figures, both look OK with them. I just made sure to widen the road I made between them on their base to allow for 15mm scale M113s to get through.