Help support TMP


Painting the Castle Kits Egyptian Temple Entrance


Egyptian Temple Entrance Kit
Product #
EGY TEMPLE ENT KIT
Manufacturer
Suggested Retail Price
$20.00 USD


Back to Workbench


Charles Marlow Inactive Member writes:

I'm impressed. I like the rich colors.


Revision Log
14 August 2008page first published

3,030 hits since 14 Aug 2008
©1994-2014 Bill Armintrout
Comments or corrections?

Minidragon Fezian Inactive Member of Mini-Dragon writes:

Before I could get started painting the Temple Entrance, I needed to get some sand glued onto the base, and I needed to figure out exactly where everything was going to go.

I laid out the terrain first by simply placing things where I thought they might look good (referring to the instructions for the original composition along the way). Once I had things the way I wanted them, I did some measuring to make sure things would square up, and then glued down the pieces of the Temple Entrance.

Pieces in position

Next, I used regular Elmer's glue (white glue), thinned a bit with water, to glue down the sand in large patches.

Since the glue on the sand was still drying, I started the painting process on the obelisks, statues and pillars. I used an orangey-brown craft paint (thinned with water) as the base color for the stone pieces.

First paint

You can see from the way the paint pooled at the bottom of the pillars that my mix was pretty thin (and I wasn't terribly concerned about neatness…).

Paint pools

Next, I added some tan to my base color and liberally drybrushed the stone pieces.

Drybrushed

Another (largish) helping of tan into the mix and another heavy drybrush finished off the stone bits of the terrain piece.

More drybrushing