Help support TMP


Embassy Assault Carrier: Step 1


Embassy-Class Assault Carrier
Product #
DS00006
Manufacturer
Suggested Retail Price
£6.50 GBP


Back to AZTECING THE EMBASSY ASSAULT CARRIER

Back to Workbench


Revision Log
20 May 2009page first published

6,290 hits since 20 May 2009
©1994-2017 Bill Armintrout
Comments or corrections?

ZandrisIV Sponsoring Member of TMP Inactive Member writes:

First the model was cleaned up, the mold lines cleared away and any flash removed. Any air bubbles, are filled with a mixture of talcum powder and superglue. Once the filler mixture has hardened, it is sanded down flush with the existing surface.

When preparations are complete, the model is scrubbed with dishwashing liquid to remove any mold release and dust from the sanding, before being mounted on a flying stand.

The model is then given two coats of the Halfords grey primer and left to dry overnight.

Primed