Help support TMP


Hawker Hurricanes: Reinforcing the Joints


Hawker Hurricane
Product #
12029016
Manufacturer
Suggested Retail Price
$6.95 USD

Hawker Hurricane w/40mm guns
Product #
12029017
Manufacturer
Suggested Retail Price
$6.95 USD


Back to HAWKER HURRICANES: STRAIGHTENING & SCRAPING

Back to Workbench


Revision Log
23 July 2008page first published

Areas of Interest

World War Two in the Air

Featured Link


Featured Ruleset


Featured Workbench Article

Hurricanes & Magnets

Cold Steel gives us advice, and we test it.


3,218 hits since 23 Jul 2008
©1994-2024 Bill Armintrout
Comments or corrections?

The Membership System will be closing for maintenance in 3 minutes. Please finish anything that will involve the membership system, including membership changes or posting of messages.

miscmini Fezian writes:

Even though the alignment pins assured a nice fit, I decided to reinforce the joint with a metal pin (paper clip). I removed the alignment pins with a hobby knife...

Removing Alignment Pin

...and used a small drill to make and lengthen the holes for the pins.

Drilling Hole for Alignment Pin

I inserted the pins, did a test fit, and then glued and clipped the pins.

Cutting the Alignment Pin
Finished Alignment Pins