Help support TMP


Tool Bench Hardware Painters Tape


Personal logo gamertom Supporting Member of TMP writes:

You can also use small loops to stick terrain to your table top or mat. Just cut a small amount, make a loop with the sticky side out, and the mash it on the bottom of the terrain. then plac3e the terrain where you want it. Helps to keep stuff from sliding around when clumsy people like me move units.



Back to PROFILES


Areas of Interest

General

Featured Hobby News Article


Featured Link


Featured Showcase Article

Elmer's Xtreme School Glue Stick

Is there finally a gluestick worth buying for paper modelers?


Featured Profile Article

Council of Five Nations 2010

Personal logo Editor in Chief Bill The Editor of TMP Fezian is back from Council of Five Nations.


Revision Log
23 October 2023page first published

1,478 hits since 23 Oct 2023
©1994-2024 Bill Armintrout
Comments or corrections?

Personal logo Editor in Chief Bill The Editor of TMP Fezian writes:

This is a review of a roll of painters tape. Specifically, Tool Bench Hardware brand of painters tape, as found at Dollar Tree.

Painters tape

But let me digress for a moment. Why, you are probably wondering, are we discussing painters tape on a wargaming forum?

Most of us probably grew up using masking tape around the house. It was a tan-colored tape composed of wrinkled paper, and it was intended for use in masking – that is, putting tape over areas to protect them from getting paint on them. However, masking tape was useful for all kinds of purposes, so it was popular when I was growing up.

Today, masking tape has largely been replaced by painters tape or blue tape. The main difference is that painters tape is low tack – that is, it is less likely to pull up paint when you remove it from a surface.

So What Has That Got to Do With Wargaming?

I haven't seen painters tape being used for much in wargaming, although it's useful sometimes when painting striping in larger scales. It can be also used for inexpensive roads on your gaming table.

Models

However, I have something else in mind. In the photo above, you can see some 15mm models (broken into sub-assemblies) which I intend to prime using spray paint.

Box

I find it useful to do my spray painting using box bottoms, the kind they give away at warehouse stores. This way, I can organize my work in the box, carry it to where I intend to do the spray painting (usually, my back porch), and then place it on a shelf where things will be safe as the paint dries.

The problem is that lightweight pieces might move around when being spray painted, and even heavy metal objects might fall over or slide around when the spray-box is being moved.

Taped-down models

That's what I use painters tape for. It is easy to make a loop, stick it down on the box, then place the objects I want to paint. Some people prefer to use double-sided tape, which would be easier, but I prefer painters tape due to it being low tack (less likely to break delicate pieces being removed, or to pull paint off the models).

Painters tape

So I tried out the inexpensive tape from the dollar store, and I advise against using it:

  1. the tape is thin and easily tears just when pulling it off the roll
  2. the tape is not low tack
  3. the tape leaves a sticky residue

I usually love the dollar store, but in this case, avoid the low-cost painters tape and go for a better brand.