|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Mike Snorbens writes: |
There are too many choices to make this a meaningful poll (even for TMP). |
Back to the Homepage
849 hits since 8 Jul 2009
©1994-2010 Bill Armintrout
Comments or corrections?
If you were a member of this website, you could participate in website polls. Would you like a free membership?
| VOTING RESULTS | |||
| Answer | Votes | % | Chart |
15-minute epoxy | 8 | 1% |  |
|---|---|---|---|
Araldite Epoxy Resin | 11 | 1% | |
Beauty Secrets quick dry nail glue | 2 | 0% | |
Ceis | 1 | 0% | |
dental CA | 2 | 0% | |
Devcon 5-Minute Epoxy | 7 | 1% | |
Devcon superglue | 0 | 0% | |
Duco Cement | 10 | 1% | |
Elmer's Glue | 123 | 12% | |
Elmer's Pliobond Wood Glue | 2 | 0% | |
Elmer's Wood Glue | 38 | 4% | |
epoxy glue | 22 | 2% | |
epoxy putty | 21 | 2% | |
five-minute epoxy | 43 | 4% | |
Goop | 4 | 0% | |
Gorilla Glue | 19 | 2% | |
Gorilla Superglue | 12 | 1% | |
hot glue | 36 | 4% | |
Insta-Cure cyanoacrylate | 16 | 2% | |
JB Weld | 16 | 2% | |
Kneadatite | 12 | 1% | |
latex paint | 4 | 0% | |
Liquid Nails | 8 | 1% | |
LocTite 406 | 6 | 1% | |
LocTite superglue | 27 | 3% | |
Model Master's plastic cement | 11 | 1% | |
Plastruct Bondene | 3 | 0% | |
Plastruct Plastic Weld | 11 | 1% | |
Plastruct Weldene | 1 | 0% | |
PVA carpenters glue | 17 | 2% | |
PVA/white glue | 87 | 9% | |
superglue | 124 | 13% | |
superglue gel | 83 | 8% | |
Tamiya | 3 | 0% | |
Tanax | 5 | 1% | |
Testors clear glue | 9 | 1% | |
Testor's Model Glue | 61 | 6% | |
UHU | 23 | 2% | |
Warglue | 2 | 0% | |
wood glue | 21 | 2% | |
Zap-a-Gap | 80 | 8% | |
| POLL IS CLOSED |
| POLL DESCRIPTION | |
Lately I have been using something called Gorilla SuperGlue, and it works wonders. I use it for both metals and plastics. I also use it for mounting the fig onto the base itself. Fer flocking, I just use regular white glue. What are you all using fer yer figs? (Choices taken from this discussion) |
