"Modular Shopping Mall Released" Topic
5 Posts
All members in good standing are free to post here. Opinions expressed here are solely those of the posters, and have not been cleared with nor are they endorsed by The Miniatures Page.
Please remember that some of our members are children, and act appropriately.
For more information, see the TMP FAQ.
Return to the Modular Shopping Mall Released News
Areas of InterestGeneral
Featured Hobby News Article
Featured Link
Featured Showcase Article How does coverbinding work?
Featured Workbench Article Basing an inexpensive tree with a toy wheel and some clay.
Featured Profile Article Looking for inexpensive paint?
Current Poll
Featured Book Review
|
| Dragon Gunner | 18 May 2013 3:24 p.m. PST |
|
| The Sentient Bean | 18 May 2013 4:35 p.m. PST |
|
| BigNickR | 18 May 2013 4:51 p.m. PST |
Print at 50%, (or two pages per page)and use 3mm instead of 5mm foamcore. Do that and it's spot on for 15mm |
| MajorB | 19 May 2013 2:53 p.m. PST |
Print at 50%, (or two pages per page)and use 3mm instead of 5mm foamcore. Do that and it's spot on for 15mm Don't you mean 60%? |
| Skipper | 19 May 2013 4:02 p.m. PST |
I regularly print at 50% for these buildings, but print it at 4 pages per sheet not 2, otherwise it ends up about 66-67%. Remember to slightly oversize the rabbits for the 3mm board or maybe remove one side of the card stock. Either helps in the tight fits. I've got some early build pictures in 15mm on the Stoelenz site (See Below)
link
These were all 15mm builds. You will note a few 5mm (1/4 inch) boards in a few of the pictures. They were early tests but still worked out ok. Skipper |
|
