We are proud to present a new, tabletop-ready stone bridge, and a full series of painted walls and more! Everything presented below is intended to enhance mainly the coming series of Urban tiles. However, they are already into production, so you can grab yours sooner.
The New Stone Bridge
The idea was to design a stone bridge which would not only work with the new canal tiles, but would be able to span the rivers of our original river tiles, especially at the "ford" river tile type (where road tiles can "connect" and cross "rivers").
The Bridge is cast in solid, durable high quality resin, and has a slight arch with a span of 14cm. Its width is 9cm, although the available surface for movement is 7cm wide. As everything we make, it is ready to be used straight on your tabletop – you can get yours now here!
Revamping the Walls' System
Walls and fences decorate almost every corner of the urban environs, and I wanted our backers to have some extra options for theirs. So we went ahead and re-designed a full range of walls and fences, which look great and cover most gaming needs. The walls were expanded to include "Stone Walls", "Walls with Irregular Stones" and "Large Brick walls." All are cast in high quality resin, are extremely sturdy, they look stunning and they stay upright (although there is still the option to magnetize their bottoms). Their lengths vary from 10cm to 12cm, their height is at 2.5cm and they are 1-1.5cm thick. They are sold in sets of two's, and you can find them in the eshop.
And we didn't stop there; our previous "hedges" were simple and affordable, but it was time to upgrade them to something closer to the quality of our Battlefields. The old idea was thrown away, and the new Hedges are now available: full irregular 3D creations, shaded in green – or flocked if you want to go the extra step. They are made from sturdy plastic sponge and pvc, and they stretch for 14cm with a thickness of 2cm. Their tops and sides are hand-sculpted to be irregular, with a maximum height of 3cm. They come in sets of two's as well, with the option of getting them simply painted or realistically flocked.
Last but not least, I would be remiss if I did not include an option for the modern and futuristic battlefield: here comes the Wirefence, a completely new addition in our line.
The fence is basically made from high quality aluminum mesh, and each of the two end posts is attached to a small but strong neodymium magnet. Along with the fence, we include two small slim steel disks to act as bases. You can use the disks to stabilise your fence, or alternatively, bend the fence at any post to create wirefence corners. The aluminum mesh can be bent and restored for as many times as you wish. Each Set includes one wirefence section of 25cm length, and 4.5cm high, along with two slim steel disks (2cm diameter).
I sincerely hope you like these new scenic designs. They are already under production, so while they were designed to enhance the new Urban sets, you can get them beforehand in their new eshop page.