Handcrafted Dungeons: Basic Dungeon Tiles Set 1
Publisher: Outland Arts
You've spent countless hours painting your fantasy miniatures to look their best, why not play on some of the best-looking gaming tiles?
Handcrafted Dungeons are literally that, crafted and painted by hand. All the details added to the furnished tiles are also hand-built components and placed in the dungeons to add to the adventure's mystery, depth, danger and treasure-hunting appeal. While a bit of retouching was necessary to clarify certain features, modify some stone colors, or show lines, everything you see was either made by hand, or built from a scratch model kit as in the case of the skeletons. We made the tiles from an air-dry clay, used real stones, sand, twigs, and scraps of wood, and then stained, painted and antiqued the tiles. Even the arms and armor on the skeletons was hand-built.
Our sets include tiles in their most basic, unfurnished variants, as well as adorned or 'staged' versions. The staged tiles come with bones, skeletal remains, chains, bridges, barrels, staircases, doors, pits, collapsed portions of the ceiling, coffins, crates, blood spatters, treasure piles, and more. Using standard one-inch tiles, these grids are perfect for 20mm, 25mm and 28mm fantasy games.
These tiles provide ready-to-play gaming terrain that has an Old School, epic sword-and-sorcery feel, perfect for roleplaying or any fantasy miniature dungeoncrawl.
While there are literally hundreds of layout possibilities with HandCrafted Dungeons Set 1, especially if printing duplicates of standard halls and rooms, one can always use more tiles for more options. Given this, we recommend the wonderful, highly appealing dungeon tiles produced by Inked Adventures. We liked them so much that we made a special 4" x 8" connecting corridor piece, included in set HCD 1.
This line will start with Classic Dungeons sets 1 and 2, and will be followed by Caverns Set 1 which is in production. If you would like to be notified when additional sets become available, email us with the words 'Handcrafted Dungeons' or 'HCD updates' or similar in the subject line.
Sets include 300dpi JPEGs of all floor tiles, plus PNG format tokens for VTT play (Virtual Tabletop)
Handcrafted Dungeons Set 1: Basic Dungeon Tiles includes 63 tile pieces:
Twelve 8" x 8" Chamber tiles, five being empty rooms with six variations of these that are furnished rooms. Two of these chambers have tiny rooms set inside a network of single-file corridors, while the twelfth is a lava-filled chamber with mere stepping stones as possible access to the chambers beyond. One false step here and players will be rolling up a new character!
13 4" x 4" Dead Ends, perfect for closing off another tile's extra doors or hallways that might otherwise lead the minis off the tabletop! This set includes the basic square and round ends, as well as the collapsed corridor, stairwell, and several furnished end-pieces containing a library, coffin, outhouse, portcullis with treasure chest, and wine cellar.
Five variants of a 4" x 4" narrow point; one being an open passage, another with a door, a third with a secret door, another with an old blade trap and beheaded skeleton, and the fifth, an open pit trap that the characters must try to leap across.
14 4" x 8" Corridors. This set contains more of these than in the upcoming set two, as this collection focuses on the initial exploration of the dungeon and the expedition to lower levels. Corridors include a variety of standard, unadorned hallways, as well as several with doors, split halls, ceiling collapses, a flooded passage with slippery stepping stones, and a narrow hall with two side guard-posts.
13 8" x 8" Corridor sections, including 'L' turn, T-Junction, and four-way cross junction. There are also a pair of curved 90-degree-turn corridors, along with many staged and ready for encounters and other pitfalls.
Eight Special extra tiles include the following:
Four 8" x 8" tiles to create either an unadorned 8" x 16" Grand Hall (HCD1-60A and 60B), or the same chamber furnished, with the left side being a feast area and the right side a throne room (HCD1-61A and 61B). By substituting either the blank left or right side for a furnished side, the banquet or throne portion can be left out.
One 8" x 9" large entrance tile (HCD1-4), allowing the characters access to the dungeons you create, as well as three possible routes once inside.
Two 4" x 8" sections that work together (HCD1-21 and HCD1-22). The first is a corridor section overlooking a deep cavern below. The only way across is a rickety, broken wood bridge. The second tile is for those characters who fall off or through the creaky bridge. This lower tile has a two-space side-access opening to join it to other standard tiles.
One 4" x 8" set connector between Handcrafted Dungeons and our allies over at Inked Adventures.
Five Paper Model Door sheets are also included, offering four cut-and-assemble, free-standing double doors, and five single doors. These doors are optional components, and are scale models requiring simple cutting, folding, and the application of a few drops of glue. Adhesive magnet strips can also be applied to their bottoms to add extra stability and weight.
Two Accessory Token Sheets: We've included a pair of accessory sheets containing tiles of various dimensions to be used during game play to reveal traps, treasure, drains, trap doors, skeletons, fire elements, bottomless pits, and much more. Most of these tokens also appear in the furnished versions we've created and included in the set. These can be cut from the sheet, and either placed on a game square loosely, or adhered to the tile with some sort of removable adhesive for either in-game play or photocopying to create your own custom furnished tiles.
Also, each set includes three separate, ready-to-print PDFs in full color, grayscale, and more printer-friendly inkjet color formats:
Print-on-Demand Option Coming Very Soon!
Price – $12.99 USD
