|
| unknown member writes: |
Agreed 28mm Fanatik the price comparison for 15mm is not in favour of the Butlers models. In 28mm not so clear cut. The 1/50 Solido model is about the same price, but equally crude or there is the very expensive Quarterkit model. Not all printed models are crude however. I have a 1/56 Marmon Herrington Light tank that you couldn't tell from a plastic kit. No lines at all. It was expensive though, but given it is very unlikely you will ever see it in plastic or resin it is the only way you will get one. So that's where I am at the moment. I would buy a decent printed model of a rare bit of kit I wanted, but there are cheaper and/or better ways of getting the bulk of your forces. |
Rating: 
Ammunition Hill was the most fortified Jordanian position that the Israelis faced in 1967.
1,782 hits since 28 Jun 2018
The Membership System is temporarily offline for maintenance. It should be restored shortly.
unknown member of Butlers' Printed Models writes:
6mm is £1.00 GBP
12mm is £3.50 GBP
15mm is £5.50 GBP
20mm is £11.00 GBP
28mm is £27.00 GBP
6mm is £1.00 GBP
12mm is £4.00 GBP
15mm is £5.75 GBP
20mm is £12.00 GBP
28mm is £30.00 GBP
The AMX-30B2 and AUF 155 mm GCT AUF are available in all scales.
Everything is 3Dprinted to order.
Text edited by unknown member
Graphics edited by unknown member
Scheduled by unknown member
