has been spending time in paradise lately.
ProCreate putty far surpasses the traditional Blue/Yellow "greenstuff" that the hobby has been using for so long. It has all the properties of Green, but it can be smoothed and spread more like clay. When cured, it can be filed, sanded and polished like "brownstuff."
The mixed color (gray) is so much easier on the eyes when working, too.
We were lucky enough to be able to get samples during the development of this putty. We have been using it for the better part of 6 months and have nothing but good things to say about it. We have vulcanized it hundreds of times now with no problems at all.
We are so pleased with this putty that we are switching over exclusivlely to it, as there is no need to stock many different types of putties any more.
It is available in the online store now.
Here is some important data about the putty:
ProCreate Professional Sculptors Putty
Contents of Blister – One bar each Resin and Hardener, 35 grams each, 70 grams total. Each bar is individually wrapped in foil paper for long term storage protection
Directions:
- In order to achieve optimal adhesion, surfaces should be cleaned free of grease or dirt.
- See chart to determine the desired mix ratio. It is possible to adjust this ratio somewhat, depending upon the sculpting requirements.
To Use:
- Cut desired amount of each part
- Mix two parts together with fingers until a uniform gray color is achieved
- Apply to surface and sculpt
See chart for projected working time.
Manipulating Cure Time:
- Place the mixed ProCreate in the freezer to stop hardening
- Place the mixed ProCreate under a warm lamp (95 ˚ F /35 ˚ C max – oven recommended) to speed the hardening process
Features and Benefits:
- Mixed Color: Gray
- No shrinkage
- Very easy to smooth
- Easy tooling and less sticky
- Holds Extremely Fine Detail
- Customizable Formula (see chart)
Additional Curing Information:
- Thin sections will cure more slowly
- Thicker sections will cure faster
- Heat will cure the epoxy faster
- Cold will cause the epoxy to cure more slowly