Vehicle Storage Insert for Sally 4th Warchests

Chris Abbey writes:

Well, I can only speak from my own experience, which is that with our vehicle inserts foam is not needed. The cross rails are movable so you can set them to the width of the particular vehicle. We take our sloppy jalopy vehicles to shows to go into our display cases and they travel with no damage. The warchest provides a good solid shell, which stacks with our other figure chests. We can use a clear lid, so we can see what's in the box. We put a single piece of bubble wrap type material around vehicle and move divider to correct setting. I've got a huge collection of foam inserts and find that if they are tight when you push vehicles in, delicate bits can get broken and if vehicle is lose they rattle around against foam and delicate bits can get broken. Horses for courses I guess.

Areas of Interest

General

1,676 hits since 31 Mar 2017

Chris Abbey of Sally 4th writes:

Over the years, Warchests together with clear bases have been some of our most popular items. As we have received requests from customers, we have developed more and more inserts, so that we now have a range that covers pretty much any figure base size that you could imagine. However, since we became show stockists for Sloppy Jalopy, we have been searching for a good solution for safely storing and transporting model vehicles.

This week, we have added a Warchest Insert for Vehicles to the range. This is made from 3mm Medite and consists of two rails which are glued to the side of a Warchest and a set of four movable dividers that can be slotted into the rails. This insert will fit our 70mm, 100mm and 120mm high Warchests, and can of course be combined with a clear front panel and clear lid if required.

Insert retails at £5.00 GBP.

For more information

Text edited by Editor Dianna
Graphics edited by Editor Hebber
Scheduled by Editor in Chief Bill