"Balsa 3D Space ship walls" Topic
All members in good standing are free to post here. Opinions expressed here are solely those of the posters, and have not been cleared with nor are they endorsed by The Miniatures Page.
For more information, see the TMP FAQ.
Back to the Modern Auctions Market Board
Back to the Terrain Auctions Market Board
Back to the SF Auctions Market Board
Back to the Miscellaneous Auctions Market Board
Areas of InterestGeneral
|VCarter ||13 Apr 2019 11:55 a.m. PST|
3D Space ship walls. Can also be used for LV-426.
Balsa wood walls for 28mm gaming.
Two different configurations shown in pictures.
Low weight make them excellent for convention gaming.
I will include two custom made molds for casting additional doors.
All walls are 2 inches high.
The inside walls are highly detailed with work stations, piping, and other objects on the walls and the outside walls are flat except where doors are on the inside.
The Ral Partha British soldier (true 25mm) is for scale only and is not included in the set.
Contains the following pieces:
5 – Reactors with bases
4 – Left sided L shaped wall sections 12 inches long with 3 inch side walls.
4 – Right sided L shaped wall sections 12 inches long with 3 inch side walls.
1 – T section 10 inch top wall and 10 inch center wall.
1 – T section 6 inch top wall and 6 inch center wall.
6 – L section corner walls 3 inches long with 3 inch side walls.
7 – L section corner walls 6 inches long with 6 inch side walls.
1 – L section corner walls 6 inches long with 5 inch side wall.
3 – 1 inch x 1 inch tower that is 5 inches tall.
4 – Flat walls from 1 to 6 inches long.