Extra Crispy | 08 May 2020 2:39 p.m. PST |
More than you ever wanted to know about my storage system: link |
Editor in Chief Bill | 08 May 2020 2:52 p.m. PST |
We're pretty similar. I use the 12" x 12" mailers (also from Uline! – 2" 3" and 4" heights), bought a big 24" wide roll of magnetic sheeting years ago (just ran out this week!), and same type of storage shelves. Your box size is smart idea. (I had boxes before shelves, so…) I don't do labels though, I just write on the box. |
epturner | 08 May 2020 2:59 p.m. PST |
You are far too organized and efficient. I am insanely jealous and envious at the same time. I hate you both… Eric :-) |
Redcurrant | 08 May 2020 3:18 p.m. PST |
Very impressive – I have seen shops with less product and far worse organisation. |
D6 Junkie | 08 May 2020 3:28 p.m. PST |
|
79thPA | 08 May 2020 5:33 p.m. PST |
But does your system allow you to find unopened packs of figures that you bought in 1985? |
Extra Crispy | 08 May 2020 6:33 p.m. PST |
I've only been in the hobby since 2005 so…no. |
whitphoto | 08 May 2020 6:36 p.m. PST |
Good lord, you move all that stuff every couple of years? |
Extra Crispy | 08 May 2020 6:53 p.m. PST |
Well, so far its' been 3, 5, 1, 5. |
Extra Crispy | 08 May 2020 6:53 p.m. PST |
Usually "relocation expenses" are part of the wife's contract… |
rmcaras | 08 May 2020 6:56 p.m. PST |
Mark – do you know the U-Line stock number? I cant find one that is 18" x 12". I can find 17" x 11" x 2.5" deep [S-3187]; I can see 18x18x2, 19x12x2.5",…..these are inside dimensions, but should not vary to OD by more than 1/8".. Thanks. |
Extra Crispy | 09 May 2020 5:32 a.m. PST |
Here is a link to the 2" link |
Extra Crispy | 09 May 2020 8:12 a.m. PST |
Link to the movement tray article fixed. |
Oberlindes Sol LIC | 09 May 2020 9:34 a.m. PST |
|
Gonsalvo | 09 May 2020 2:59 p.m. PST |
I am using the same shelf units, two of them now, to supplement the 4 older ones I have. |
Syrinx0 | 09 May 2020 9:35 p.m. PST |
Uline is great. At our gamaing club, we bought a lot of the Uline mailers and filled them with egg crate foam for the 28mm figure storage for the WWII figures and vehicles. There is probably over 100 of the boxes but we just wrote in marker on them. No cool labels. For my GW 40K boxes I used a larger (higher) box to accommodate the smaller vehicles and 12x6x6 boxes for the larger tanks. I cut foam for those myself. For all my more recent additions I have been using RUB plastic boxes with a metal liner and magnets on the bases. You get quite a few more figures in each container though they are not as resilient to movement. |
Doctor X | 10 May 2020 11:55 p.m. PST |
I do pretty much the same thing but with Sterilite plastic 3 drawer containers. I line them with sheet magnet and they hold 90+ 28mm figs per drawer using a 1" square base. Mark's labels are much fancier though. Another shout out for Uline and MagnetKing. Good suppliers. |