"Dyi Killteam board" Topic
3 Posts
All members in good standing are free to post here. Opinions expressed here are solely those of the posters, and have not been cleared with nor are they endorsed by The Miniatures Page.
Please do not use bad language on the forums.
For more information, see the TMP FAQ.
Back to the 28mm Sci-Fi Message Board
Areas of InterestScience Fiction
Featured Hobby News Article
Featured Recent Link
Top-Rated Ruleset
Featured Showcase Article A post-apocalyptic militia force begins to assemble.
Featured Profile Article Looking for some inexpensive mecha?
Featured Movie Review
|
| zrunelord | 17 Mar 2019 12:10 p.m. PST |
Hello again all,
If you want a board for less than 5€ , here is what you can do. I took photos of my Necromunda/ Wh40k flat terrain, cut & pasted them into a larger than 22" x 30" pdf .
I found a very good app called " PosteRazor", which divides a large pic into A4's according to what you want the final size to be .
Then printed them at the local printer on a laser jet ( photographic quality) , well worth the 30 cents I am charged for each A4 & stuck them on to a large piece of card. Then I gave it a coat of white glue for protection.
The hexagonal buildings are turkish delight boxes covered with the same print as the board & they fit neatly into each other for saving space. link
Enjoy
Z |
nnascati  | 17 Mar 2019 12:33 p.m. PST |
What sort of cards did you use that they don't warp? |
| zrunelord | 17 Mar 2019 11:41 p.m. PST |
The card is around 3mm thick, similar to Gw boards.
I have experimented with cardboard, anvas, cloth, pvc & foamcore for portable boards . All have pros & cons. See here also.
link Z |
|
