Help support TMP


"Need dimensions of Sarissa Bruegel Canal & Son bridges" Topic


8 Posts

All members in good standing are free to post here. Opinions expressed here are solely those of the posters, and have not been cleared with nor are they endorsed by The Miniatures Page.

For more information, see the TMP FAQ.


Back to the Terrain and Scenics Message Board

Back to the WWII Discussion Message Board

Back to the WWII Models Review Message Board



944 hits since 15 Feb 2017
©1994-2017 Bill Armintrout
Comments or corrections?

Mad Guru Supporting Member of TMP15 Feb 2017 11:40 p.m. PST

Hi there,

Been looking around but haven't managed to track down exact measurements for these 2 bridge models…

picture

picture

I really need to know the maximum width of canal and river space available under each bridge, as I'm about to start building rivers for them both for a big convention game, but my gaming group has yet to get their hands on the actual models.

Of course we should just wait until the models arrive so I can use them to measure the river widths, but as is so often the case, time is passing and schedules are already locked, and I need to start cutting the MDF.

If any fellow gamers can help me out, I would tremendously appreciate it.

Thanks in advance and good gaming!

M C MonkeyDew16 Feb 2017 8:58 a.m. PST

Have you written to Sarrissa Precision to ask?

enquiries @ sarissa-precision . co . uk

Steve has always been most helpful in answering my questions. Also very amenable to custom work so if you need it resized there is no harm in asking.

Good luck.

Bob

Personal logo miniMo Supporting Member of TMP16 Feb 2017 8:00 p.m. PST

I'm curious to find out too.

Mad Guru Supporting Member of TMP17 Feb 2017 3:18 a.m. PST

Thanks, Bob.

miniMo, if I manage to succeed in learning the dimensions, I shall return and post the info here.

Footslogger18 Feb 2017 8:52 a.m. PST

I was interested too, and thanks for bringing this up, I hadn't noticed Sarissa do these.

I've dropped them a line too, but no reply so far.

Mad Guru Supporting Member of TMP18 Feb 2017 4:20 p.m. PST

Just got an email reply from Steve at Sarissa Precision, saying he would check and get back to me with the dimension info tomorrow!

When that happens I'll post it here.

Mad Guru Supporting Member of TMP15 Mar 2017 4:11 p.m. PST

Got the info from Sarissa:

Distance between 2 ramps on the Bruegel Canal Bridge is… 100mm

(as shown in pic below)

picture

Distance between 2 ramps on the Son Bridge is… 282mm

(as shown in pic below)

picture

My thanks to Sarissa Precision for sending me the dimensions, as well as the pics to help illustrate.

Personal logo miniMo Supporting Member of TMP17 Mar 2017 7:59 p.m. PST

Great, thanks for sharing the info!

Sorry - only verified members can post on the forums.