Sorry was gone a bit,
Using QIDI dual head printer, based on Flashforge
Was about 650 at Amazon.
They have a new single for about 300 I think now, just came out.
Slicer is Simplify 3d
simplify3d.com
It costs a bit, but I have had almost zero issues with it, and it has some deep controls if you need to get really picky.
Mostly printing at 0.1 on stuff though the larger buildings are 0.2 to keep print under 24 hours.
Did a few tests at 0.08 and it worked well.
Scratch building is still great to do, and I will add some custom stuff for some of these as well that way.
But now if I need that building for 15mm I can print it or shrink it for 6mm.
For doing one offs 3D is slower by far if your designing it your self.
But I am learning the software and have a Defense system about ready for prime time.
I am enjoying learning the software and what I can get my printer to do.
Wish I could afford the B9 Creator that is a resin printer that can print 6mm figures with great detail.
But 4500 vs. 650 and resin is 125 or so per bottle compared to 22 a roll.
It is fun, I have about 40 buildings now so cleaning and painting comes next.
Also registering as a 3d Hub so I can print these for other folks.
Building up an Album on Facebook, as it is easy to put the tags and give credit with the pics there.