Help support TMP

"Need a moldmaker to cast 28mm elephants in resin." Topic

5 Posts

All members in good standing are free to post here. Opinions expressed here are solely those of the posters, and have not been cleared with nor are they endorsed by The Miniatures Page.

For more information, see the TMP FAQ.

Back to the Moldmaking and Casting Message Board

734 hits since 31 Aug 2015
©1994-2018 Bill Armintrout
Comments or corrections?

Rhingyll Supporting Member of TMP31 Aug 2015 1:00 p.m. PST

I am looking for a company that can cast a limited run of three different masters of 28mm elephants(the body only, no head) in resin. Need to create the molds and then produce 24 to 30 originals of each figure.

45thdiv31 Aug 2015 2:46 p.m. PST


Smooth On has a list of companies that can make molds and do the work you are looking for.

Here is the list, and I see a company on the list that might be worth looking in to.


Depending on where you are located, you might be able to look at nearby states who might also be on the list.


imdone Inactive Member31 Aug 2015 3:57 p.m. PST

I would recommend Valiant Enterprises in Madison Wisconsin. They do a lot of Resin Casting and do a lot of contract resin casting for companies you likely assume do their own internally (but don't).

I have worked with them myself and had great experiences.

45thdiv31 Aug 2015 5:47 p.m. PST

I would want to have the casting service reasonably near by so that I could drive there, speak with them about the project and drive home in one day.

Nothing beats face time with your caster or mold maker.


Rhingyll Supporting Member of TMP01 Sep 2015 3:12 p.m. PST

Thanks for all the help and information.

Rhingyll Supporting Member of TMP29 Sep 2015 3:39 p.m. PST

Zoltar – Sent off the elephant to Valiant. Hoepfully get something back in two or three weeks. Seem very reasonably priced at $25.00 USD cost for the mold if I understood him correctly.

Sorry - only verified members can post on the forums.