PhilBenz | 14 Jul 2015 5:18 a.m. PST |
I have several hundred figures based on 24/25mm metal washers and have been looking for magnetic movement trays with the 25mm circle cutouts. Litko movement trays look good, but it seems like I would have to mount my washer-based troops on circular megnet bases to get any mileage out of that. What's a good solution? Seems to me like the ideal solution would be rectangular movement trays with 25mm indents for the figures, with a sandwiched magnetic plate. I shudder at having to build them myself. |
JimDuncanUK | 14 Jul 2015 5:21 a.m. PST |
Have a word with Martin at Warbases. He's bound to have a good suggestion. war-bases.co.uk |
PhilBenz | 14 Jul 2015 5:45 a.m. PST |
Thanks, Jim, I've just sent off a request. What other solutions would folkd suggest? Should I be thinking about putting 25mm magnetic round bases on the bottom of each and every figurine? <gasp> Or just live with standard non-magnetic movement trays? How much added value do magnetic bases or movement trays offer? |
JimDuncanUK | 14 Jul 2015 6:32 a.m. PST |
Phil If I were making movement trays for 25mm metal washer bases I would get Martin to make a top layer (2mm or 3mm) with round cutouts where you want them to be and also supply a base layer the same size without the cutouts. I would then add a layer of magnetic tape all over the bottom and glue the top layer on top. Then scenic to taste. Am not sure if Martin would agree. |
MajorB | 14 Jul 2015 7:28 a.m. PST |
Or just live with standard non-magnetic movement trays? How much added value do magnetic bases or movement trays offer? The whole point of the movement tray with holes in a top layer is that you DON'T need any magnets – unless you plan on picking up a tray loaded with figures and turning it upside down! The holes are a tight enough fit that the figures don't fall out easily. |
JimDuncanUK | 14 Jul 2015 7:33 a.m. PST |
@MajorB You could well be right. |
Bobgnar | 14 Jul 2015 9:14 a.m. PST |
I'm confused by this discussion. If you have metal washer bases, in circles I assume, why do you need cut out circle movement trays when the metal bases would just stick to flat magnetic bases? When I tried putting circular based figures into movement trays with circles they still fell over when I tilted the tray or worse if they were tight, I pulled out the figure and the base popped off. I put all my figures on magnetic squares or circles and then use thin metal for the movement trays. I do have some figures on washers and I just put them on flat pieces of magnet, if not rigid then glued to some card stock |
Jlundberg | 14 Jul 2015 11:17 a.m. PST |
To me the magnetic trays are great if they prevent figures from bouncing around in transit |
CeruLucifus | 15 Jul 2015 10:05 p.m. PST |
I do what Bobgnar does. I tried using metal lined boxes for transport, but had too many mishaps with figures popping loose when the car when over bumps. |
PhilBenz | 16 Jul 2015 9:32 a.m. PST |
Thanx, y'all. Looks like what I really need to do is some trial and error. I'm enthused about doing terrain on the movement trays. You see, I usually play skirmish games (Pathfinder, D&D, etc), so all my figures are individually based. But I'd like to do some mass battles sometime in the near future, so I'm looking at a hybrid solution where my individually-based figures can line up in formations, without my having to rebase them per se. Transport is a concern as well. I thought magnetic movement trays might help preserve the paint and the fragile parts. |