"6mm Basing" Topic
9 Posts
All members in good standing are free to post here. Opinions expressed here are solely those of the posters, and have not been cleared with nor are they endorsed by The Miniatures Page.
Please remember that some of our members are children, and act appropriately.
For more information, see the TMP FAQ.
Back to the 6mm Sci-Fi Message Board
Areas of InterestScience Fiction
Featured Hobby News Article
Featured Recent Link
Top-Rated Ruleset
Featured Showcase ArticleAt last - the Relthoza Escorts get their turn in front of the camera...
Featured Workbench Article
Featured Movie Review
|
Moe the Great | 20 Nov 2014 8:01 a.m. PST |
Do most people base their 6mm Vehicles? I was thinking of maybe a couple to a base to represent a company or platoon etc. I know it depends on the rule set normally but I do like the look of multiples on a base. Thoughts? |
Dynaman8789 | 20 Nov 2014 8:13 a.m. PST |
I base them singly on vinyl floor tiles. Some of them are so tiny they would get lost if dropped on the floor (I've lost a couple jeeps that way before I started basing them…). You can also label the back side of the base to know what the vehicle is (T34, sure I know what that is on sight, the mk23ai5h not so much) |
sean68333 | 20 Nov 2014 8:15 a.m. PST |
I label my bases. I think it helps tie the whole army together when you base the infantry and vehicle with the same materials. I use metal bases and that aids in transportation/storage as the models are now magnetic. |
Legion 4 | 20 Nov 2014 4:22 p.m. PST |
No … I only base Infantry and some light weapons … here's another thread from here on a similar topic … TMP link |
Lion in the Stars | 20 Nov 2014 4:49 p.m. PST |
since my only 6mm vehicles are Robotech, yes, I base all my 6mm vehicles. some of the model won't stand unsupported. |
Paul S | 21 Nov 2014 6:08 a.m. PST |
base all on 30x30. massives tend to be on 60x60 just makes things easier. grav are on their stands on a base |
Moe the Great | 21 Nov 2014 3:42 p.m. PST |
On a related(ish) topic, what's the easiest way to base, but leave an area for info like for Look Sarge No Charts, on the back of the base? |
Dynaman8789 | 21 Nov 2014 5:14 p.m. PST |
Put same tape of the appropriate width on the back and do the basing. When done pull off the tape and you have a spot for putting labels. |
Moe the Great | 22 Nov 2014 7:58 a.m. PST |
I was wondering if it was just that easy… I will have to give it a try. Thanks everyone. I will try to send out some test pictures. |
|