Help support TMP


"ClearHorizon Minis - Kickstarter Hura Squads Updates" Topic


1 Post

All members in good standing are free to post here. Opinions expressed here are solely those of the posters, and have not been cleared with nor are they endorsed by The Miniatures Page.

Remember that you can Stifle members so that you don't have to read their posts.

For more information, see the TMP FAQ.


Back to the Not found! Message Board

Back to the 15mm Sci-Fi Message Board


Areas of Interest

Science Fiction

Featured Hobby News Article


Featured Link


Featured Ruleset


Featured Movie Review


619 hits since 6 Jul 2014
©1994-2024 Bill Armintrout
Comments or corrections?

Personal logo MrHarold Sponsoring Member of TMP06 Jul 2014 7:28 p.m. PST

Hi everyone,

We have the latest update to our kickstarter! Already Funded and almost at the first stretch goal!

link

Here are the start of the poses for the Hura:

picture

Hura squad

1x command already sculpted

1x heavy like command but with helmet that covers middle of head and a bit more body armor plates and round forcefields generators (small) holding larger quad barrel weapon with all four arms
4x same as heavy load out with small gun
A) firing with small arms. Big arms and legs walking forward
B) firing to left holding gun with small arm and big arm, other small arm and big arm to the side
C) kneeling with small arms firing, big arms at ground
D) kneeling as above but gun lowered

And there will be one more:

Holding the gun in the small arms in a firing position but using his legs and large arms to run, a bit like a gorilla

--

And Sean (the sculptor) had this to say:

Attached is a pic of the Hura armatures and bulk ups. As before I'll add the small set of arms after the body is done so they don't get in the way.

I added a bit of height to them so they look taller, I'll correct the Command model that is already sculpted so he is the same height as well. I only added about 1mm of height.

I thought the legs looked "stumpy" compared to what the artwork showed.Attached is a pic of the Hura armatures and bulk ups.

--

And he's also working on the Epsilon heads as we speak and should have something soon!

Any feedback is always appreciated!

Sorry - only verified members can post on the forums.