"Primer v Resin Problem" Topic
3 Posts
All members in good standing are free to post here. Opinions expressed here are solely those of the posters, and have not been cleared with nor are they endorsed by The Miniatures Page.
For more information, see the TMP FAQ.
Back to the Pre-Paint Preparation Message Board
|
| Lord Hypnogogue | 21 Feb 2010 6:05 p.m. PST |
I prepped and primed an Orc fleet for Uncharted seas. 24+ hours later the primer is still tacky. I washed the resin in dishsoap and water, rinsed, let it dry for a week before I primed them. I had shaken the can, cleared the nozzle. It was fairly warm, though it was humid. Should I give it a little longer? Are there any cleaners (Simple Green, Purple Power specifically) that I should avoid if I need to strip them? |
miscmini   | 21 Feb 2010 6:15 p.m. PST |
I would wait for a day with humidity below 70%. Then I'd try giving it another very light coat of primer and then putting it someplace with plenty of airflow. If that doesn't work and you want to strip it I'd use Simple Green. Kevin TMP link |
| Warlord | 21 Feb 2010 10:05 p.m. PST |
Hey Lord Hypnogogue Have a look here, there are several suggestions from others that seem to be working. TMP link hope that helps |
|
