"Wanted used Melting Pot" Topic
6 Posts
All members in good standing are free to post here. Opinions expressed here are solely those of the posters, and have not been cleared with nor are they endorsed by The Miniatures Page.
Please don't make fun of others' membernames.
For more information, see the TMP FAQ.
Back to the Hobby Industry Message Board
Areas of InterestGeneral
Featured Hobby News Article
Featured Link
Featured Workbench Article The pros and cons of plastic in palette knifes.
Featured Profile Article Using artificial intelligence to create wargaming music.
|
| rolljordan | 18 Jun 2009 3:19 a.m. PST |
As for title I am looking for a used melting pot for lead melting.
Currently I have a; link Looking for a similar model, bigger or a little smaller. Must be 220V. You can email me at ROLLJORDANatHOTMAILdotCOM |
| sgt Dutch | 18 Jun 2009 8:03 a.m. PST |
Try Lee precision or RCBS. They both make lead pots for casing bullets. Link to Lee: link Lee is inexpensive. I have used their pots for 20 years. |
Jay Wirth  | 18 Jun 2009 8:49 a.m. PST |
Keep an eye on ebay. The Lee pots are nice. If you can get a damaged pot even better, as Lee will refurbished (send you a new one) at a much lower cost than purchasing new. |
| rolljordan | 19 Jun 2009 2:44 a.m. PST |
Thanks guys I have seen them but they are too small :(
4" wide pot just too little.
I need something that will hold a minimum of 20 pds of metal up to 40 pds. Anyone else the best will be a used one like the one I have. |
| throughthegap | 20 Jun 2009 2:29 a.m. PST |
TMP is a bit of a melting pot…. |
| rolljordan | 07 Feb 2010 12:08 p.m. PST |
Ok guys your help needed again :) got for a little over 250$ a Ritehete Soldering lead melting pot, 30#, model VSR. 220V But is not digital. It has a round pome with numbers 1 to 10 :) does anyone know what temperature these set the machine to? I wrote the company and asked they said 1 = 150F and 10 900F so increments of about 84F'? I asled back but never got a reply. I probbaly need to melt at 360'F so guess 3.5 on the gauge? Thanks for all the help. Chris :) |
|
